The 6 Step of Rotation Pattern
Step 1 : We can divide into 2 groups which are
1. Spindle, Main Core, Rotor : The axis is almost horizontal or perpendicular (Sun, Mercury, Venus, Jupiter, Uranus), ( Pic 1)
2. Hole, Stator : Slope of the axis is close to 30 degrees. ( Earth, Mars, Saturn, Neptune)
Step 2 : Create a Hole, Stator by Push The Planet's Axis
Let's say the planet's axis is at around 30 degrees. (Pic 2)
If we push (Red Arrow) the axis to perpendicular (A line in Pic 3), the sun will be tilted down and the angle B will be 60 degree (Pic 3)
Step 3 : Small & Big Hole
3.1 Create a Small Hole, Stator (Inside Hole = Earth, Mars)
Let's say the planet's axis is at around 30 degrees.(Pic 4)
If we push (Red Arrow) the axis to perpendicular (A line in Pic 5), the sun will be tilted down and the angle B will be 60 degree (Pic 5)
It is a same method like above (3.1) and the picture is Pic 6 and 7 (Respectively)
Step 4 : Merged The Hole (Small Inside & Big Outside)
When we are connecting inside and outside of the orbits between the asteroid belt, the stator will be shown as in Pic 8 (2 dimensions)
The 3D stator that shown as in Pic9
Step 6 : Insertion
6.1 Main Core, Rotor
When the main core is inserted into the stator, it looks like a drill head that hurls to the sun. (Pic 10)
6.2 Capacitor
When the capacitor is placed on the core (Pic 11), (Venus will lie on the axis. Because it is a only clockwise planet that different from others) And the capacitor spindle is perpendicular to the main core too
6.3 Big Ring
Big Ring (Asteroid Belt) will be between Mars and Jupiter (Pic 12)
The function of the Big Ring is to allow the main core (Jupiter) swing to not exceed the height of the small stator (Mars) as shown in Pic 13
Related Link
Gear
Fan Motor
Bushing
Ring
Rotation Pattern
Switching Speed
Fly
